Indonesia import regulation 2026: what each change punishes

Three amendments to the Indonesia import regulation in 2026, dated 8 May, 4 June and 9 October, do not point the same way. One added commodities to the licensed list. One loosened a deadline that was holding cargo at the port. One opened a single narrow channel for used electronics and left the rest closed.

Each amendment punishes a different mistake, and what now applies is three regimes stacked on one border. Preparing for the wrong one leaves the container where it is. Imports reached USD 210.63 billion in the first nine months of 2026, up 19.67% year on year, according to Statistics Indonesia. Raw and intermediate materials accounted for USD 150.57 billion and capital goods for USD 41.55 billion, roughly 91% of the total between them. Those two categories are what the licensing regime governs.

8 May: six commodities moved onto the licensed list

Minister of Trade Regulation 11/2026, the first of the three Indonesia import regulation changes this year, was signed on 24 April and took effect on 8 May. It amends the 2025 rules on agricultural and livestock imports, adding feed wheat, soybean meal, mung beans, peanuts, broken rice for feed and pears to the commodities that require an import approval, and it requires a technical recommendation from the Ministry of Agriculture before that approval is issued.

Two of the six carry an extra condition. Broken rice for feed needs a commodity balance document inside the application. Pears need proof of cold storage capacity and a surveyor report.

The stated purpose is food self-sufficiency and price stability for domestic growers. Andri Gilang Nugraha, the ministry’s Director of Imports, said at the launch that mung beans and peanuts had been entering without volume or timing limits and that the absence of limits had reduced planting among local farmers.

The operational effect is that the queue now starts in a different ministry from the one that issues the approval. A technical recommendation is a step with its own internal review, and the importer has no visibility into how long that review takes until the first application clears.

The two May and June regulations are often read together because they landed six weeks apart. They amend different instruments. Regulation 11/2026 amends the 2025 rules covering agricultural and livestock goods. Regulation 18/2026 amends the 2025 rules covering imports in general. They are administered by different units, they fail in different places, and a fix applied to one does not travel to the other.

4 June: the deadline got flexible, the reporting got automatic

Regulation 18/2026 is the second amendment to the 2025 general import framework, following an earlier one in 2025. The customs directorate’s regulation index dates it to 3 June and gives 4 June as the day it took effect. Three of its provisions entered force on 4 July and the fourth applied from 4 June.

Article 29 allows a surveyor report to be issued after the import approval has expired, provided the pre-shipment verification was completed while the approval was still valid and the goods had already reached Indonesia. Before this, cargo that cleared inspection but missed the paperwork window was re-inspected, and re-inspection lands on the importer as cost and delay.

Article 31 adds a matching requirement. The approval number in the surveyor report must match the one in the customs declaration, and the check runs electronically across INATRADE and the national single window.

Articles 69 and 70 change what happens when an importer does not file the import realisation report. The ministry issues an electronic warning, the importer has 30 days, and after that the approval for the same commodity category can be suspended.

The report records how much of an approved volume was actually imported. The ministry uses it to test whether the approval volume still matches demand, which is why the sanction attaches to the approval and why a shipment with a clean file can still trigger it.

The suspension attaches to the category rather than to the shipment. An importer holding one approval across several product lines loses all of them over a report about one consignment, and the warning itself can go unread if nobody is monitoring the INATRADE account.

Article 91A gives the government a route to override the regime when goods stop moving, on grounds of national interest, public welfare, a government programme or a presidential instruction. That provision took effect on 4 June, ahead of the rest.

The same regulation also sets a review deadline for licence applications and authorises the system to issue an approval automatically once that deadline passes without a decision. Read with Article 29, the direction is consistent. Delay risk is being moved off the importer’s file and onto the ministry’s own clock, and the reporting side is where the discretion now sits.

9 October: one channel for used electronics

Regulation 23/2026, the narrowest of the three Indonesia import regulation changes, amends the 2025 rules on non-new goods and non-hazardous waste and took effect on 9 October. It covers 136 tariff lines of used electronic goods and permits them only as raw material for designated processing industries inside the Batam free trade zone.

Four conditions run together. The importer must hold a business identification number functioning as a producer import licence, which excludes trading companies operating under the general licence. An import approval and a surveyor report are both required, and technical verification has to be completed in the country of origin before shipment. The goods may not leave Batam for the rest of the customs territory. Monthly realisation reports go through the national single window.

The rule establishes a legal route that did not previously exist for this class of goods. Equipment that arrives damaged, obsolete or intended for disposal falls under separate waste rules, and the framework does not cover electronic waste under another name.

Batam’s status as a free trade zone is what makes the restriction workable. Goods enter without the duties that apply elsewhere in the country, so the line between the zone and the rest of the customs territory has to be enforced by document, which is why the conditions are documentary and why the monthly reporting is written into the authorisation itself.

Three mistakes the Indonesia import regulation now punishes

The first is treating an import approval as a one-off permission. The realisation report is a recurring obligation attached to the approval, and Regulation 18/2026 made the consequence automatic.

The second is assuming a mismatch can be fixed at the counter. Validation reads the record, so an explanation offered at the port does not reset a field that the system has already compared.

The third is using a trading licence for a production purpose. Regulation 23/2026 requires the producer form of the import licence, and the general form does not open the Batam channel.

Scale decides how much each mistake costs. Raw and intermediate materials rose 21.11% in the first nine months of 2026 and capital goods 16.49%, both faster than consumer goods at 15.54%, so the licensing regime sits on the categories that are growing fastest. China supplied USD 76.16 billion of non-oil and gas imports in the same period, 42.77% of the total, ahead of Japan at 5.64% and Australia at 4.53%. Mechanical machinery, electrical machinery and plastics together made up about 37.95% of non-oil and gas imports, which is where a classification error reaches furthest.

Before the next shipment

Four checks follow from the three regulations, and between them they cover most of what the Indonesia import regulation now asks of an importer booking a first shipment.

  • Match the classification against the licensed list in force now, not the list that applied when the order was placed. The commodity list changed on 8 May, and the framework for used equipment changed on 9 October.
  • Confirm the approval number reads identically in the surveyor report and the customs declaration before the vessel arrives. The comparison happens on the record.
  • Put the realisation report on a calendar with the same weight as the shipping schedule. The 30-day warning runs from an electronic notice, and missing the notice does not pause it.
  • For used equipment, confirm the producer form of the import licence before booking freight. The general form does not reach the Batam channel.

What is not published

Three gaps affect a booking decision and none of them has a published answer under the Indonesia import regulation as it stands. The ministry has not issued average processing times for technical recommendations under Regulation 11/2026, so the queue length for the six new commodities is unmeasured. Customs reports inspection outcomes in aggregate but not by importer, so the share of a given company’s consignments routed to physical inspection cannot be benchmarked against a peer group. And the implementing guidance for the Batam framework has not appeared, which leaves the definition of designated processing industries to be settled case by case.

The next signal is that guidance. Until it is issued, the Batam channel exists as an authorisation, and the Indonesia import regulation for used equipment will be defined by the first approvals granted under it.

This article was prepared by the expert team at Global Infinity Labs, drawing on insights and data provided through its MCP data services.

About Global Infinity Labs

Global Infinity Labs is an AI innovation company specializing in MCP data services.

Email: support@globalinfinitylabs.com

To share industry insights, report corrections, or submit story tips: editors@globalinfinitylabs.com or https://www.globalinfinitylabs.com/submit.