Bangkok trade fair 2027: Informa merges three shows
ProPak Asia left BITEC in June 2026 after more than a decade in Bang Na and grew by 5,000 square metres in the move, the largest single change behind the Bangkok trade fair 2027 calendar. The 2025 edition used 55,000 square metres at BITEC with 2,000 exhibiting brands from 42 countries and 72,000 visitors. The 2026 edition opened at IMPACT Challenger in Muang Thong Thani on 10 June across 60,000 square metres, listing 2,500 brands, 13 national pavilions and more than 80,000 visitors in the organiser’s post-show release.
The 2027 edition goes further. ProPak Asia runs 9-12 June 2027 at IMPACT alongside ASEAN Paper Bangkok and LOUPE Southeast Asia, with floor space up a further 15% and more than 80% of advance space reserved, according to Informa Markets Thailand’s announcement.
Three shows, one week, one venue. That is the shape of the June block, and it changes what an exhibitor gets for one trip.
What moved, and what it displaced
ProPak Asia had run at BITEC every year from 2007 to 2025, according to its published edition history. Its footprint reached 55,000 square metres, close to the limit of a single BITEC hall block.
The arithmetic behind the move is visible in the two floor plates. A show that grows every year eventually runs out of contiguous space in a hall it has already filled, and the alternative is splitting exhibitor categories across a second block. A single level of 60,000 square metres removes that choice for one edition and leaves room for the 15% increase booked for 2027.
IMPACT offered that floor plate without internal columns. Challenger Halls 1 to 3 cover 60,000 square metres, measuring roughly 131 by 459 metres under a 25.7 metre ceiling, and the wider complex adds another 47,000 square metres across Halls 5 to 12.
The label show moved too. Labelexpo Southeast Asia ran at BITEC from 8 to 10 May 2025, its most recent edition under that name. It now trades as LOUPE Southeast Asia, and the 2027 edition sits inside the ProPak week at IMPACT rather than on its own dates in Bang Na. The 2025 edition listed 6,019 visitors, 195 exhibitors and 5,459 square metres, according to the show’s published statistics.
Food and agriculture shows moved in the same direction. VIV Asia 2027 runs 10-12 March at IMPACT with 38% more exhibition space than its previous edition, expanding into Halls 1 to 7. The 2027 layout adds Hall 5 for country pavilions, Hall 6 for feed and grain technology and Hall 7 as a meeting area, and it co-locates with Meat Pro Asia and HortiAgri Next Asia.
BITEC held the industrial block. Manufacturing Expo still runs there with InterPlas Thailand, InterMold Thailand, NEPCON Thailand, Surface and Coatings, Automotive Manufacturing and Assembly and Automation Technology, all dated 16-19 June 2027. METALEX returns in November.
The 2027 calendar, venue by venue
The Bangkok trade fair 2027 calendar divides along a clean line once the moves are mapped.
BITEC’s year opens with two small logistics shows sharing EH100 on 4-5 March, Thai Cargo Expo and Smart Delivery Expo. Food Pack Asia and Thailand Industrial Fair follow on 10-13 March in Halls 101 and 102. The automation and subcontracting block runs 12-15 May with Subcon Thailand, InterMach and MTA Asia.
June is thinner at BITEC than it was in 2025. Thailand Franchise and Business Opportunities runs 10-13 June, and the Manufacturing Expo group takes 16-19 June. Food Ingredients Asia follows on 1-3 September, with FHT and the hospitality technology show on 15-18 September.
IMPACT has published a shorter list. Beyond VIV Asia in March, it has ABEE, ASEE, AWE and ARHC running together on 17-19 March, four energy and cleanroom events that share one visitor badge. LIFT EXPO Thailand runs 28-30 April, and the ProPak block takes 9-12 June. Dates for the second half of its 2027 calendar were not listed at the time of publication.
The one date collision left
March is the only month where the Bangkok trade fair 2027 calendar stacks two competing food and packaging shows into one week. Food Pack Asia runs at BITEC from 10 to 13 March and VIV Asia runs at IMPACT from 10 to 12 March. They overlap for three of the same four days, and both carry processing and packaging equipment.
The two shows differ in scale and in ownership. Food Pack Asia is organised by Digiview Advertising Group and its 2027 factsheet lists Halls 101 and 102 at BITEC. VIV Asia covers animal protein from feed to processing and now fills seven halls.
For a food manufacturer sourcing a filling or packing line, both are relevant, and they cannot be covered in sequence. For a regional distributor with four days in Bangkok, the calendar forces a choice.
June no longer produces that problem. What used to be two separate trips, ProPak in June and Labelexpo in May, is now one week in one venue. Whether that is better depends on what the exhibitor sells.
What a square metre costs
Space rates are published unevenly across the Bangkok trade fair 2027 season, and BITEC’s are the easier to check. The rate card for a 2026 BITEC industrial show lists raw space at THB 13,000 per square metre, or USD 380, with a 24 square metre minimum. Shell scheme runs THB 16,000 per square metre, or USD 465, with a 9 square metre minimum. A THB 2,500 application fee applies per exhibiting company, and all rates exclude 7% VAT.
At those rates a 24 square metre raw space booking costs THB 312,000 before VAT, and a 9 square metre shell stand costs THB 144,000. Build, freight, rigging and staff costs sit on top and usually exceed the space charge for a custom stand.
Those figures come from one show’s brochure and move by event and by year. They still indicate the order of magnitude for an industrial hall at BITEC.
On cost alone, shell scheme carries a smaller minimum at a higher rate, while raw space starts at 24 square metres at a lower one. Machinery exhibitors take raw space because floor loading and rigging rule out a packaged stand.
Build-up rules differ from venue to venue. At BITEC the build-up and dismantling windows are set by each show organiser in the exhibitor manual rather than by the venue, and custom stand contractors normally get earlier access than shell scheme exhibitors. The binding deadline is the organiser’s manual date, not the venue’s calendar.
IMPACT quotes space show by show, and the constraint that matters there is distance. Challenger Halls 1 to 3 sit in one continuous block, while Halls 5 to 12 sit elsewhere on the site, which changes freight routing, build-up windows and how long a visitor needs to cross the show.
Choosing on buyer type
The Bangkok trade fair 2027 split maps onto buyer type more closely than the calendar suggests, which makes the venue decision simpler than it looks.
If the target buyer is a plant manager sourcing machine tools, moulds, automation or surface treatment, the BITEC calendar concentrates those shows into May and June with METALEX in November. Three trips cover the industrial year.
Visitors can check the fit before booking. Most Thai industrial shows publish a post-show report listing visitor numbers by job function and by country, and the useful filter is whether procurement, production engineering or plant management titles appear at all. A show that reports only a total attendance figure leaves an exhibitor unable to tell whether the people walking the aisle sign purchase orders.
If the target buyer sits in food, beverage, agriculture, paper or packaging, the 2027 dates put those shows at IMPACT in March and June. Two trips cover it, and the June block now holds upstream and downstream in one site.
Access differs. BITEC sits on Bang Na-Trat Road around 20 kilometres from central Bangkok and about 15 kilometres from Suvarnabhumi Airport. IMPACT sits in Nonthaburi to the north and is served by the MRT Pink Line at two stations, MT01 at the venue and MT02 at the lake.
What is still unpublished
Two gaps affect Bangkok trade fair 2027 planning. IMPACT has not listed the second half of its calendar, so any exhibitor targeting November or December has no confirmed dates yet. BITEC has dated most of its 2027 shows but has not published hall allocations for them, and the hall determines ceiling height, rigging limits and whether a two-storey stand is possible.
The March collision could still dissolve. Organisers move dates before exhibitor manuals are issued, and neither show has published a final floor plan.
What is fixed is the direction of travel. The multi-hall shows have moved to the site with 60,000 square metres on one level, and the industrial shows have consolidated at the site with the older hall inventory. Any Bangkok trade fair 2027 booking made on 2025 assumptions is being made against a calendar that no longer exists.
This article was prepared by the expert team at Global Infinity Labs, drawing on insights and data provided through its MCP data services.
About Global Infinity Labs
Global Infinity Labs is an AI innovation company specializing in MCP data services.
Email: support@globalinfinitylabs.com
To share industry insights, report corrections, or submit story tips: editors@globalinfinitylabs.com or https://www.globalinfinitylabs.com/submit.